4
OUTPUT
+
–
+
–
+
–
+
–
INPUT
2
AUTO
PHASE
STANDBY
INPUT
1
TO SPEAKERS
/MONO
LOW
NORM REV
OFF
HIGH
FROM AMPLIFIER
POWER
OFF
ON
SPLIT SUBWOOFER
SUBWOOFER
(
LOW PASS
)
OUTPUT
+
–
+
–
+
–
+
–
INPUT
2
INPUT
1
TO SPEAKERS
/MONO
FROM AMPLIFIER
CONNECTIONS
Caution: Plug in the subwoofer and other audio/video components after all connections are
completed.
• All connections must be correct, that is to say
L
(left) to
L
,
R
(right) to
R
, “
+
” to “
+
” and “
–
” to “
–
”. Also refer to the owner’s
manual for each of your components.
• Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to pages 4 and 5 for details.)
If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the
amplifier. (Refer to pages 6 and 7 for details.)
Subwoofer
Amplifier
To AC outlet
• To connect with a YAMAHA DSP amplifier (or AV
receiver), connect the SUBWOOFER (or LOW PASS etc.)
terminal on the rear of the DSP amplifier (or AV receiver)
to the
L
/MONO INPUT2 terminal of the subwoofer.
Connect the main speakers to the speaker output terminals of the amplifier.
• When connecting the subwoofer to the SPLIT
SUBWOOFER terminals on the rear of the DSP amplifier,
be sure to connect the
L
/MONO INPUT2 terminal to the
“L” side and the
R
INPUT2 terminal to the “R” side of the
SPLIT SUBWOOFER terminals.
Connecting to line output (pin jack) terminals of the amplifier
■
Using one subwoofer
Left main speaker
Right main speaker
*Illustration shows YST-SW205.