USING THE SLEEP TIMER
58
En
Use this feature to automatically set this unit to the standby mode after a specified time period. The sleep timer is useful
if you are going to sleep after a certain amount of time while this unit is still playing back a source.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
2
Press SLEEP on the remote control
repeatedly to set the amount of time for the
sleep timer.
Choices: 120min, 90min, 60min, 30min, OFF
The SLEEP indicator in the front panel display
flashes while switching the amount of time for the
sleep timer.
Each time you press SLEEP on the remote control,
the front panel display changes as shown below.
3
Wait for a few seconds without operating this
unit to confirm the setting for the sleep timer.
The SLEEP indicator lights up in the front panel
display, indicating that the sleep timer is activated.
USING THE SLEEP TIMER
Setting the sleep timer
STEREO
MY BEAM
2
1
SLEEP
CH LEVEL
MENU
RETURN
TEST
SURROUND
OFF
SPORTS
3
4
5
6
7
8
9
0
+10
5BEAM
ST+3BEAM
3BEAM
MUSIC
MOVIE
VOL MODE
AUTO
SETUP INPUTMODE
YSP
TV/AV
ENTER
YSP
TV/AV
SLEEP
SLEEP
Flashes
SLEEP
SLEEP
120min
SLEEP
90min
SLEEP
60min
SLEEP
30min
SLEEP
OFF
SLEEP
Lights up
