Yamaha YPP-100 Light Piano Скачать руководство пользователя

Страница: 41 / 54

YPP-100

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

3 MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)
cc = Control number
vv = Data Range

(1) All Sound Off

ccH

Parameter

Data Range (vvH)

78H

All Sound Off

00H

Switches off all sound from the channel. Does not reset Note On
and Hold On conditions established by Channel Messages.

(2) Reset All Controllers

ccH

Parameter

Data Range (vvH)

79H

Reset All Controllers 00H

Resets controllers as follows.

Controller

Value

Expression

127 (max)

Damper Pedal

0 (off)

Sostenuto

0 (off)

Soft Pedal

0 (off)

(3) Local Control (reception only)

ccH

Parameter

Data Range (vvH)

7AH

Local Control

00H (off), 7FH (on)

(4) All Notes Off

ccH

Parameter

Data Range (vvH)

7BH

All Notes Off

00H

Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the damper or sostenuto pedal
will continue to sound until the pedal is released.

(5) Omni Off (reception only)

ccH

Parameter

Data Range (vvH)

7CH

Omni Off

00H

Same processing as for All Notes Off.

(6) Omni On (reception only)

ccH

Parameter

Data Range (vvH)

7DH

Omni On

00H

Same processing as for All Notes Off.

(7) Mono (reception only)

ccH

Parameter

Data Range (vvH)

7EH

Mono

00H

Same processing as for All Sound Off.

(8) Poly (reception only)

ccH

Parameter

Data Range (vvH)

7FH

Poly

00H

Same processing as for All Sound Off.

• When control change reception is turned OFF in the Function

mode, control change data will not be transmitted or received
except for Bank Select and Mode messages.

• Local on/off, OMNI on/off are not transmitted. (The appropriate

note off number is supplied with “All Note Off” transmission).

• When a voice bank MSB/LSB is received, the number is stored

in the internal buffer regardless of the received order, then the
stored value is used to select the appropriate voice when a
program change message is received.

• The Multi-timbre and Poly modes are always active. No change

occurs when OMNI ON, OMNI OFF, MONO, or POLY mode
messages are received.

Si vous êtes très familier avec l’interface MIDI ou si vous

utilisez un ordinateur pour commander votre matériel de
musique au moyen de messages MIDI générés par ordina-
teur, les données suivantes vous seront utiles et vous aide-
ront à commander le YPP-100.

SI usted está ya familiarizado con MIDI, o si emplea una

computadora para controlar sus aparatos musicales con
mensajes MIDI generados por computadora, los datos
proporcionados en esta sección le ayudarán a controlar la
YPP-100.

If you’re already very familiar with MIDI, or are using a

computer to control your music hardware with computer-
generated MIDI messages, the data provided in this section
can help you to control the YPP-100.

Falls Sie bereits mit MIDI vertraut sind oder einen Compu-

ter zur Erzeugung von MIDI-Steuermeldungen für die Instru-
mente verwenden, können Sie sich zur Steuerung des YPP-
100 nach den im folgenden Abschnitt aufgeführten Spezifi-
kationen richten.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 10H ~ 73H = E-1 ~ G7 /

Receive: 00H ~ 7FH = C-2 ~ G8)*

vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv]

(reception only)

8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity

* If received value exceeds the supported range for the selected

voice, the note is adjusted by the necessary number of octaves.

2. CONTROL CHANGE

Data format: [BnH] -> [cc] -> [vv]