Yamaha YM-4600A, Руководство пользователя

Страница: 13 / 16

27
ASSEMBLY
b
Set the tone bars.
5-1. Set the natural tone bars first.
With one person holding the suspension cords on the bass side and the other holding the sus-
pension cords on the treble side securely with both hands, gently place the tone bars on the rails.
Align each tone bar individually and hook its cord onto the corresponding post. After confirming
that the cord is secured to every post, fix the tone bars by pulling the right and left cords forward
from the large end side and hooking the two springs into each other.
* When setting the tone bars, use care not to cause any damage to them.
Large end
Suspension cord
Resonance regulator
5-2. Each of F
#
22
, G
23
, G
#
24,
A
25
and A
#
26
resonators has a resonance regulator. While tapping each
tone bar, move the resonance regulator to find the position where the best resonance is obtained
and fix it there.
* When fixing the resonance regulator, check to ensure that it is not aslant.
YM-5104A/5100A/4900A Only
Suspension cord
Small end
Post
02_ym5100_en.indd 27 14/10/10 10:17