Yamaha YM-4100A, Руководство пользователя

Страница: 11 / 14

27
ASSEMBLY
v
Insert the rails (1) and (4) into the end frames of the legs.
4-1. Insert the outer rails (1) and (4) in the same way as the inner rails (2) and (3).
A mark “ A ” is printed on the big end face of the rail (1) and the groove section of the end frame of the
big end leg, and a mark “ D ” for the rail (4).
4-2. Engage the rail clamps on rail (2) and rail (3) with
rail (1) and rail (4) respectively.
4-3. Secure the resonators by fitting their hooks to the
rail clamps engaged in Step 4-2.
* Hooks are provided at 2 locations both on the natu-
ral tone side and the accidental tone side.
* Make sure that each hook is securely fitted.
Rail clamp
Hook
Rail (2)
Rail (1)
YM-5100A Only
“A” mark on the rail
and end frame.
“D” mark on the rail
and end frame.
Rail (1)
Rail (4)
Large end
Small end
ym̲5100a̲en.pm6 07.1.19, 2:10 PM 27