7-2
1
2
3
4
5
6
7
8
9
SCOOTER CARE AND STORAGE
then rinse thoroughly with clean water.
Use a toothbrush or bottlebrush for hard-
to-reach areas. Stubborn dirt and insects
will come off more easily if the area is
covered with a wet cloth for a few min-
utes before cleaning.
After riding in the rain, near the sea or
on salt-sprayed roads
Since sea salt or salt sprayed on the
roads during winter are extremely corro-
sive in combination with water, carry out
the following steps after each ride in the
rain, near the sea or on salt-sprayed
roads.
NOTE:
Salt sprayed on roads in the winter may
remain well into spring.
1. Clean the scooter with cold water
and a mild detergent after the en-
gine has cooled down.
ECA10790
c
C
Do not use warm water since it in-
creases the corrosive action of the
salt.
2. Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.
After cleaning
1. Dry the scooter with a chamois or
an absorbing cloth.
2. Use a chrome polish to shine
chrome, aluminum and stainless-
steel parts, including the exhaust
system. (Even the thermally in-
duced discoloring of stainless-steel
exhaust systems can be removed
through polishing.)
3. To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray on all metal, includ-
ing chrome- and nickel-plated, sur-
faces.
4. Use spray oil as a universal cleaner
to remove any remaining dirt.
5. Touch up minor paint damage
caused by stones, etc.
6. Wax all painted surfaces.
7. Let the scooter dry completely be-
fore storing or covering it.
EWA10940
w
8
8
8
8
8
Make sure that there is no oil or
wax on the brakes or tires. If nec-
essary, clean the brake discs and
brake linings with a regular brake
disc cleaner or acetone, and
wash the tires with warm water
and a mild detergent.
8
8
8
8
8
Before operating the scooter test
its braking performance and cor-
nering behavior.
ECA10800
c
C
8
8
8
8
8
Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.
8
8
8
8
8
Never apply oil or wax to any rub-
ber and plastic parts, but treat
them with a suitable care prod-
uct.
8
8
8
8
8
Avoid using abrasive polishing
compounds as they will wear
away the paint.
5YR-F8199-11ch7.pmd
2004/06/11, 14:13
2
Содержание YJ125T
Страница 2: ...1 2 3 4 5 6 7 8 9 EAU10041 5YR F8199 11ch0 pmd 2004 06 11 14 11 1 ...
Страница 14: ...1 7 1 2 3 4 5 6 7 8 9 Q Q Q Q Q SAFETY INFORMATION 1 2 3 4 5 6 5YR F8199 11ch1 pmd 2004 06 11 14 11 7 ...
Страница 73: ...9 6 1 2 3 4 5 6 7 8 9 CONSUMER INFORMATION 5YR F8199 11ch9 pmd 2004 06 11 14 13 6 ...
Страница 75: ...9 8 1 2 3 4 5 6 7 8 9 CONSUMER INFORMATION 5YR F8199 11ch9 pmd 2004 06 11 14 13 8 ...
