manualshive.com logo in svg

Yamaha YJ125T, Руководство пользователя

Поделиться
Скачать
Yamaha YJ125T Скачать руководство пользователя страница 49

6-15

1

2

3

4

5

6

7

8

9

PERIODIC MAINTENANCE AND MINOR REPAIR

EAU23210

Checking and lubricating the
centerstand and sidestand

ZAUM00**

The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be lubri-
cated if necessary.

EWA10740

w

If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or repair
it.

Recommended lubricant:
Lithium-soap-based grease (all-pur-

pose grease)

EAU23271

Checking the front fork

ZAUM00**

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.

To check the condition

EWA10750

w

Securely support the motorcycle so
that there is no danger of it falling
over.

Check the inner tubes for scratches,
damage and excessive oil leakage.

To check the operation

1. Place the motorcycle on a level sur-

face and hold it in an upright posi-
tion.

2. While applying the front brake, push

down hard on the handlebars sev-
eral times to check if the front fork
compresses and rebounds
smoothly.

ECA10590

c

C

If any damage is found or the front
fork does not operate smoothly, have
a Yamaha dealer check or repair it.

5YR-F8199-11ch6.pmd

2004/06/11, 14:01

15

Содержание YJ125T













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды