Yamaha YHT-S401, Руководство пользователя

Страница: 12 / 275

10
En
BASIC OPERATION
Once you have finished all cable connections and remote control operation, follow the procedure below to start basic
playback operation.
1
Press (Power).
This unit is turned on and the STATUS indicator
lights green.
The input source and surround mode appear in the
front panel display.
y
This unit has the auto-sleep function, which will
automatically switch the unit to turn off if the unit is left
turned on for 12 hours without any operation being
performed.
2
Press one of the input buttons to select an
input source.
After the input source name has been displayed in the
front panel display for three seconds, the front panel
display returns to its normal display. (Input source
name: surround/stereo mode).
3
Start playback on the selected external
component.
For information on the external component, refer to
the instruction manual for the product.
4
Press /– to adjust the volume
level.
Press SUB/– to adjust the
subwoofer level.
y
• To turn off the volume temporarily, press MUTE. While
the mute function is activated, the VOLUME indicator
flashes. To resume the volume, press MUTE again or
press /–.
• When audio is output from both TV speaker and this unit,
mute the TV sound.
• The subwoofer volume can be adjusted separately from
the volume.
• You can also adjust the subwoofer volume listening to test
tone. (
☞
P. 19)
• Lowering the subwoofer volume is recommended at night.
When sound of HDMI is output from the TV, the volume
level does not change if you press /– or MUTE
of the remote control.
5
Select surround mode or stereo mode and
set your sound preferences. (
☞
P. 11)
Insert a headphone plug to the PHONES jack (
☞
P. 3) of
this unit.
• The headphone volume, tone control can be set
separately with speaker setting.
• You can enjoy surround and stereo sound using a
headphone same as the speaker. (
☞
P. 11)
Basic playback operation
You can operate the unit by the TV’s remote control
when the HDMI control function is available. See the
page 23 for details.
1
2
4
Note
Press (Power) again to set the unit to
standby mode.
When the HDMI control function is set to on or the battery of
iPod/iPhone is charged, the STATUS indicator lights red. When
the HDMI control function is set to off, the STATUS indicator
turns off. (
☞
P. 3)
Listening with headphones