– 15 –
CHK
ADJ
ADJUSTING THE FRONT SHOCK ABSORBERS (for models equipped with two
compression damping adjusters)/ADJUSTING THE REAR SHOCK ABSORBER
(for models equipped with two compression damping adjusters)
4. Adjust:
• compression damping force (slow compres-
sion damping)
▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
a. Turn the adjusting screw
1
in direction
a
or
b
.
NOTE:
_
Make sure that the position indicator marks
c
are aligned when the shock absorber is set to
the standard setting.
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
Direction
a
Compression damping
force is increased.
Direction
b
Compression damping
force is decreased.
From the fully turned-in position
Standard: 10 clicks out
Minimum: 20 clicks out
Maximum: 1 click out
EBS00111
ADJUSTING THE REAR SHOCK
ABSORBER (for models equipped with two
compression damping adjusters)
1. Remove:
• seat
Refer to “SEAT, FENDERS AND FUEL
TANK” in chapter 3.
(Manual No.: 5TG-28197-10)
2. Loosen the clamp screw
1
, and then dis-
connect the air intake duct.
1
