Yamaha YFZ05YYXN Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 122

Yamaha YFZ05YYXN Скачать руководство пользователя страница 54

8-3

8

teristics. Take the time to learn the basic tech-
niques well before attempting more difficult
maneuvers.

Not recommended for children under 6 years
of age.

WARNING

EWB01751

A child under 6 should never operate an ATV
with engine size greater than 50 cc. Use by
children of ATVs that are not recommended for
their age can lead to severe injury or death of
the child.

This ATV is designed to carry the operator only
– passengers prohibited.

The long seat is to allow the operator to shift posi-
tion as needed during operation. It is not for carry-
ing passengers.

WARNING! Never carry a

passenger. Carrying a passenger on this ATV
greatly reduces your ability to balance and
control this ATV. You could have an accident,
resulting in severe injury or death to you and/or
your passenger.

[EWB01402]

UBW421E0.book Page 3 Monday, June 7, 2021 1:23 PM

«
...
52
53
54
55
56
...
»

Содержание YFZ05YYXN



























































































































Отзывы:

Нет отзывов