Yamaha YFM660FP 2001, Инструкция по сборке

Страница: 25 / 30

–22–
1 1 2
3 4
5
1
a
b
1 1 2
3 4
5
1
a
b
5
a
3
2
1
4
O. Select lever control cable and shift
rod adjustment
WARNING
Before moving the select lever, bring the machine
to a complete stop and return the throttle lever to
its closed position. Otherwise the transmission
may be damaged.
1. Adjust:
•
Rear brake pedal free play
2. Adjust:
•
Select lever control cable
Select lever control cable:
•
Make sure the select lever is in NEUTRAL.
•
Adjust the control cable so there is zero free play
in the cable. When the adjustment is correct, slack
in the return spring 1 will be taken up.
NOTE:
In some cases it will be necessary to further adjust the
cable with the locknuts 2 arrangement that holds the
cable to its mount.
•
When the brake begins to work “
a
= 20 ~ 30 mm
(0.8 ~ 1.2 in)”, verify that the select lever can be
shifted to REVERSE from NEUTRAL and to NEU-
TRAL from REVERSE.
•
Before the brake begins to work “
a
= 0 ~ 20 mm
(0 ~ 0.8 in)”, verify that the select lever cannot be
shifted to REVERSE from NEUTRAL and to NEU-
TRAL from REVERSE.
•
Check that locknuts 2 are tightened correctly.
•
If the operation of the select lever is incorrect,
adjust the select lever control cable 3 with the
adjuster 4 .
Select lever shift rod:
•
Make sure the select lever is in NEUTRAL.
•
Loosen both locknuts 5 .
•
Adjust the shift rod length for smooth and correct
shifting.
•
Tighten the locknuts 5 .
P. Front shock absorber adjustment
WARNING
Always adjust both front shock absorber spring
preload to the same setting. Uneven adjustment
can cause poor handling and loss of stability.
1. Adjust:
•
Spring preload
Turn the adjuster to
1
in direction
a
or
b
.
Direction
a
Spring preload is increased
(suspension is harder).
Direction
b
Spring preload is decreased
(suspension is softer).
Standard position: 2
Minimum position: 1
Maximum position: 5
Q. Rear shock absorber adjustment
WARNING
Always adjust both rear shock absorber spring
preload to the same setting. Uneven adjustment
can cause poor handling and loss of stability.
1. Adjust:
•
Spring preload
Turn the adjuster to
1
in direction
a
or
b
.
Direction
a
Spring preload is increased
(suspension is harder).
Direction
b
Spring preload is decreased
(suspension is softer).
Standard position: 2
Minimum position: 1
Maximum position: 5