manualshive.com logo in svg

Yamaha YFM250R, Руководство пользователя

Поделиться
Скачать
Yamaha YFM250R Скачать руководство пользователя страница 84

 

8-8

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU23211

 

Checking the spark plug 

 

The spark plug is an important engine component,
which is easy to check. Since heat and deposits
will cause any spark plug to slowly erode, the spark
plug should be removed and checked in accor-
dance with the periodic maintenance and lubrica-
tion chart. In addition, the condition of the spark
plug can reveal the condition of the engine.

 

To remove the spark plug

 

1. Remove the spark plug cap.

2. Remove the spark plug as shown, with the

spark plug wrench included in the owner’s tool
kit.

 

To check the spark plug

 

1. Check that the porcelain insulator around the

center electrode of the spark plug is a medi-
um-to-light tan (the ideal color when the ATV
is ridden normally).

TIP

 

If the spark plug shows a distinctly different color,
the engine could be operating improperly. Do not
attempt to diagnose such problems yourself. In-

 

stead, have a Yamaha dealer check the ATV.

 

1.  Spark plug cap

1

 

1.  Spark plug wrench

1

Содержание YFM250R







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды