manualshive.com logo in svg

Yamaha YFM250R, Руководство пользователя

Поделиться
Скачать
Yamaha YFM250R Скачать руководство пользователя страница 36

 

4-16

 

1

2

3

4

5

6

7

8

9

10

11

NOTICE

 

ECB00090 

 

Never turn an adjusting mechanism beyond

 

the minimum and maximum settings.

TIP

 

Although the total number of clicks of a damping
force adjusting mechanism may not exactly match
the above specifications due to small differences in
production, the actual number of clicks always rep-
resents the entire adjusting range. To obtain a pre-
cise adjustment, it would be advisable to check the
number of clicks of each damping force adjusting
mechanism and to modify the specifications as

 

necessary.

WARNING

 

EWB02490 

 

●

 

Suspension components become hot during
operation. Never touch the compression
damping force adjusting bolt and screw, the
rebound damping force adjusting screw or
the oil reservoir with your bare hand or skin
until suspension components have cooled.

 

●

 

Always adjust the shock absorber assem-
blies on the left and right side to the same
setting.

 

●

 

Uneven adjustment can cause poor handling
and loss of stability, which could lead to an

 

accident.

 

EBU29310

 

Adjusting the rear shock absorber 
assembly 

 

The spring preload, rebound damping and com-
pression damping forces of the rear shock absorb-
er assembly can be adjusted to suit the rider’s
weight and the riding conditions.

WARNING

 

EWB00430 

 

This shock absorber assembly contains highly
pressurized nitrogen gas. Read and under-
stand the following information before han-
dling the shock absorber assembly.

 

●

 

Do not tamper with or attempt to open the
cylinder assembly.

 

●

 

Do not subject the shock absorber assembly
to an open flame or other high heat source.
This may cause the unit to explode due to ex-
cessive gas pressure.

 

●

 

Do not deform or damage the cylinder in any
way. Cylinder damage will result in poor
damping performance.

Содержание YFM250R







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды