PREPARATION
➤
Installation
En
11
Installation
Position the center unit and subwoofer as shown below with installation.
Wireless connections
The center unit and subwoofer communicate wirelessly. Subwoofer performance may be affected if the subwoofer is placed on a metal rack, or if there is a metal plate between the
subwoofer and the center unit. Use a wired connection to connect the subwoofer to the center unit if sounds are interrupted due to the installation condition (p. 15 in the Owner’s
Manual).
Cautions
• Be sure to install the center unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
• Do not stack the center unit and subwoofer directly on top of other playback devices, or vice versa. Doing so may cause a malfunction due to heat and vibrations.
• Do not hold the speaker portion (fabric parts) on the front and the top of the center unit.
• The center unit and subwoofer contain non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk drive, etc.) near the unit.
• Depending on your installation environment, it may be better to connect the unit and external devices before installing the unit.
• The center unit can be installed on
a TV stand (p. 12) or mounted on a
wall (p. 12). It is equipped with
remote sensors positioned to
support installation on a TV stand
or mounting on a wall.
Center unit
Subwoofer
• To prevent sound reflecting off of walls,
angle the subwoofer slightly toward the
center of the room.
