Yamaha XVS13CB Скачать руководство пользователя | Manualshive

Страница: 70 / 100

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-29

7

skin, eyes or clothing and al-
ways shield your eyes when
working near batteries. In case
of contact, administer the fol-
lowing FIRST AID.

• EXTERNAL: Flush with plenty

of water.

• INTERNAL: Drink large quan-

tities of water or milk and im-
mediately call a physician.

• EYES: Flush with water for 15

minutes and seek prompt
medical attention.

●

Batteries produce explosive hy-
drogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and pro-
vide sufficient ventilation when
charging it in an enclosed
space.

●

KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

NOTICE

ECA10620

Never attempt to remove the battery
cell seals, as this would permanent-
ly damage the battery.

To charge the battery

Have a Yamaha dealer charge the bat-
tery as soon as possible if it seems to
have discharged. Keep in mind that the
battery tends to discharge more quickly
if the vehicle is equipped with optional
electrical accessories.

NOTICE

ECA16521

To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (con-
stant-voltage) battery charger is re-
quired. Using a conventional battery
charger will damage the battery.

To store the battery

1. If the vehicle will not be used for

more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.

NOTICE:

When removing the

battery, be sure the key is
turned to “OFF”, then discon-
nect the negative lead before
disconnecting the positive lead.

[ECA16302]

2. If the battery will be stored for more

than two months, check it at least
once a month and fully charge it if
necessary.

3. Fully charge the battery before in-

stallation.

NOTICE:

When install-

ing the battery, be sure the key
is turned to “OFF”, then con-
nect the positive lead before
connecting the negative lead.

[ECA16840]

4. After installation, make sure that

the battery leads are properly con-
nected to the battery terminals.

NOTICE

ECA16530

Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.

U27D11E0.book Page 29 Monday, July 11, 2011 11:15 AM

«
...
68
69
70
71
72
...
»

Содержание XVS13CB





































































































Отзывы:

Нет отзывов

Похожие инструкции для XVS13CB

Бренд: Yamaha Страницы: 88

Бренд: Wolfman Страницы: 3

Бренд: Dakota Digital Страницы: 14

Бренд: JETPRIME Страницы: 4

Бренд: Knight Страницы: 19

390 Duke AR 2018

Бренд: KTM Страницы: 22

Classic 500 2017

Бренд: Royal Enfield Страницы: 144

Бренд: HealTech Electronics Страницы: 3

Бренд: R&G Страницы: 6

Бренд: Honda Страницы: 117

Бренд: Royal Enfield Страницы: 148

Бренд: Royal Enfield Страницы: 259

Бренд: RainMaker Страницы: 36

Бренд: Bajaj Auto Страницы: 83

Бренд: Ohlins Страницы: 2

PAMPERA 125 - 2007

Бренд: GAS GAS Страницы: 58

Бренд: Yamaha Страницы: 108

Бренд: Yamaha Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды