Yamaha XVC1100P, Руководство пользователя

Страница: 65 / 115

PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
4. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
5. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil filler
cap.
EC000072*
CAUTION:
_
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives with
the oil or use oils of a “CD”
grade or higher. In addition, do
not use oils labeled “ENERGY
CONSERVING II” or higher.
● Make sure that no foreign mate-
rial enters the crankcase.
_
6. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
NOTE:
_
After the engine is started, the engine
oil level warning light should go off if the
oil level is sufficient.
_
1. Engine oil drain bolt
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lb)
Recommended engine oil:
See page 8-1.
Oil quantity:
Periodic oil change:
3.0 L (2.64 Imp qt, 3.17 US qt)
Total amount (dry engine):
3.6 L (3.17 Imp qt, 3.81 US qt)
U5PB11.book Page 11 Thursday, June 14, 2001 8:59 AM