Yamaha XVC1100P, Руководство пользователя

Страница: 46 / 115

PRE-OPERATION CHECKS
4-2
4
NOTE:
_
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a very
short time; and the added safety it assures is more than worth the time involved.
_
EWA00033
WARNING
_
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating
the motorcycle.
_
Throttle grip
• Make sure that operation is smooth.
• Check free play.
• If necessary, have Yamaha dealer make adjustment or lubricate.
6-15, 6-24
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-24
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-15–6-17
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-25
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-25
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-25
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches • Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-19
ITEM CHECKS PAGE
U5PB11.book Page 2 Thursday, June 14, 2001 8:59 AM