INSTRUMENT AND CONTROL FUNCTIONS
4-18
4
EAU44585
Auxiliary DC connector
NOTICE
ECA15311
The accessory connected to the
auxiliary DC connector should not
be used with the engine turned off,
and the load must never exceed 36
W (3 A), otherwise the fuse may blow
or the battery may discharge.
WARNING
EWA12531
To prevent electrical shock or short-
circuiting, make sure that the cap is
installed when the auxiliary DC con-
nector is not being used.
To access the auxiliary DC connec-
tor
1. Remove the rider seat. (See page
2. Unhook the battery band, and then
remove the battery cover.
3. Turn the ECU over to move it away
from the wire harness protective
cover as shown.
4. Open the wire harness protective
cover.
A 12-V accessory connected to the
auxiliary DC connector under the rider
seat can be used when the key is in the
“ON” position.
1. Battery band
2. Battery cover
1. Wire harness protective cover
2. ECU
2
1
2
1
1. Auxiliary DC connector
2. Auxiliary DC connector cap
U29S13E0.book Page 18 Thursday, May 13, 2010 7:36 PM