Yamaha XT250W, Руководство пользователя

Страница: 44 / 86

PERIODIC MAINTENANCE AND MINOR REPAIR
6-9
1
2
3
4
5
6
7
8
9
bolt to drain the oil from the oil filter
element.
7. Remove the oil filter element cover
by removing the bolts.
8. Remove the oil filter element and
O-rings.
9. Check the O-rings for damage and
replace them if necessary.
10. Clean the oil filter element with sol-
vent, and then install it.
NOTE:
Check the oil filter element for damage
and replace it if necessary.
11. Install the oil filter element cover by
installing the bolts and drain bolt,
then tightening them to the speci-
fied torques.
NOTE:
Make sure that the O-ring is properly
seated.
12. Install the engine oil strainer, com-
pression spring, O-ring and engine
oil drain bolt, and then tighten the
drain bolt to the specified torque.
CAUTION:
ECA10420
Before installing the engine oil drain
bolt, do not forget to install the
1. Engine oil drain bolt
2. O-ring
3. Compression spring
4. Oil strainer
4 3 2 1
1
1. Oil filter element drain bolt
2. Oil filter element cover
3. Bolt
1. Oil filter element
2. O-ring
2
1
3
1
2
Tightening torques:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Oil filter element drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
ProCarManuals.com