Yamaha XT250W, Руководство пользователя

Страница: 25 / 86

INSTRUMENT AND CONTROL FUNCTIONS
3-9
2
3
4
5
6
7
8
9
EAU14930
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing nut and a rebound damping force
adjusting dial.
CAUTION:
ECA10100
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
Spring preload
1. Loosen the locknut.
2. To increase the spring preload and
thereby harden the suspension,
turn the adjusting nut in direction
(a). To decrease the spring pre-
load and thereby soften the sus-
pension, turn the adjusting nut in
direction (b).
NOTE:
●
Use the special wrench included in
the owner’s tool kit to make the ad-
justment.
●
The spring preload setting is deter-
mined by measuring distance A,
shown in the illustration. The long-
er distance A is, the higher the
spring preload; the shorter dis-
tance A is, the lower the spring
preload.
3. Tighten the locknut to the specified
torque.
CAUTION:
ECA11240
Always tighten the locknut against
the adjusting nut, and then tighten
the locknut to the specified torque.
1. Spring preload adjusting nut
2. Locknut
1
2
(a)
(b)
1. Distance A
1
Spring preload:
Minimum (soft):
Distance A = 36.5 mm (1.4 in)
Standard:
Distance A = 43.5 mm (1.7 in)
Maximum (hard):
Distance A = 48.0 mm (1.8 in)
Tightening torque:
Locknut:
54 Nm (5.4 m·kgf, 39 ft·lbf)
ProCarManuals.com