Yamaha XT250M 1999 Скачать руководство пользователя страница 51

Страница: 51 / 92

6-10

PERIODIC MAINTENANCE AND MINOR REPAIR

Oil filter cover

Drain bolt (filter cover)

5. Remove the oil filter cover

bolts and the oil filter cover.

NOTE:

The oil filter cover is secured by
three bolts. The lower bolt should
be removed first so that the filter
cavity will drain.

EC000071*

Before reinstalling the oil drain
bolt, do not forget to install the O-
ring, compression spring, and oil
strainer in position.

9. Fill the engine with oil. Install

the oil filler cap and tighten it.

Oil filter element

O-ring (

6. Clean the oil filter and strainer

with solvent. Replace if neces-
sary.

7. Check the O-ring. If damaged,

replace.

8. Install the drain bolt and oil fil-

ter cover. Tighten the oil filter
cover bolts to the specified
torque.

NOTE:

Make sure the O-ring is seated
properly.

Tightening torque:

Drain bolt:

43 Nm (4.3 m.kg)

Filter cover bolt:

7 Nm (0.7 m.kg)

Drain bolt (filter cover):

10 Nm (1.0 m.kg)

4FD-9-27-6~11 4/19/0 10:31 AM Page 11

ProCarManuals.com

Содержание XT250M 1999





























































































Результаты поиска

Содержание XT250M 1999

Отзывы:

Похожие инструкции для XT250M 1999

Бренды по названию

Популярные бренды

Yamaha XT250M 1999, Руководство пользователя

Результаты поиска

Содержание XT250M 1999

Отзывы:

Похожие инструкции для XT250M 1999

Бренды по названию

Популярные бренды