manualshive.com logo in svg

Yamaha XT250M 1999, Руководство пользователя, Страница: 26 / 92

Поделиться
Скачать
Yamaha XT250M 1999 Скачать руководство пользователя страница 26

NOTE:

The tank cap cannot be reinstalled
unless it is unlocked. The key must
remain in the cap until the cap is
properly installed and locked onto
the fuel tank.

EW000023

w

Be sure the cap is properly
installed and locked in place
before riding the motorcycle.

3-6

INSTRUMENT AND CONTROL FUNCTIONS

1

2

3

4

5

6

7

8

9

1

2

EAU01183

Fuel

Make sure there is sufficient fuel in
the tank. Fill the fuel tank to the
bottom of the filler tube as shown
in the illustration.

EW000130

w

Do not overfill the fuel tank. Avoid
spilling fuel on the hot engine. Do
not fill the fuel tank above the bot-
tom of the filler tube or it may
overflow when the fuel heats up
later and expands.

1.

Fuel level

2.

Filler tube

EAU00185

c

C

Always wipe off spilled fuel imme-
diately with a dry and clean soft
cloth. Fuel may deteriorate painted
surfaces or plastic parts.

 4FD-9-27-1~5  4/19/0 10:28 AM  Page 24

ProCarManuals.com

Содержание XT250M 1999





























































































Отзывы:

Нет отзывов