Yamaha XS650 Series, Руководство по ремонту

Страница: 65 / 215

7-1. TORQUE SPECIFICATION
The following torque specifications must be
adhered to on every machine. When applying
torque to multi-secured fastener components,
the several studs should be tightened in
gradual stages and in a pattern that will avoid
warpage to the item being secured. Torque
settings are for dry, clean threads. Torquing
should always be done to the nut, never the
bolt head.
NOTE:
Certain items with other than standard thread
pitches may require differing torque.
Torque Specifications
A
10mm
1 2 m m
14 mm
17 mm
19mm
22 mm
24 mm
27 mm
Standard tightening torque
m-kg ft-lb
7
in-lb
85
175
300 350
350 400
400 440
480 570
6 mm 1.0
8mm 2.0
10 mm 3.5 4.0
12 mm i 4.0 4.5
14 mm
600 700
1
Part to be tightened
Thread dia. and
part name
Tightening torque
Engine:
Cylinder head and cylinder
head cover
Cylinder head
Cylinder head cover side
Spark plug
Generator
10mm n u t
8 mm bolt
6 mm bolt
6 mm crown nut
8 mm crown nut
l 14 mm
1 2 m m n u t
3.8 m-kg (27 ft-lb)
2.2 m-kg ft-lb)
1 m-kg 7 ft-lb)
1 m-kg 7 ft-lb)
1.5 m-kg ft-lb)
2.0 m-kg (14
4.0 m-kg (29 ft-lb)
Stator
coil 6 mm pan headscrew
1.0 m-kg 7 ft-lb)
Governer 6 m m b o l t
0.8 m-kg 6 ft-lb)
Valve clearance adjustment nut
mm nut 2.7 m-kg ft-lb)
Cam chain tensioner cover
2.2 m-kg
Pump cover 6 mm pan head screw
1 .O m-kg ( 7 ft-lb)
Strainer cover
Drain plug
Filter cover
Oil filter
6 mm bolt
i
30
mm bolt
6 mm bolt
16 mm bolt
1.0 m-kg 7 ft-lb)
4.4 m-kg (32
1.0 m-kg 7 ft-lb)
1 m-kg 7 ft-lb)