manualshive.com logo in svg

Yamaha XP560D, Руководство по обслуживанию

Поделиться
Скачать
Yamaha XP560D Скачать руководство пользователя страница 13

1-4

FEATURES

Function selection

Push the “MENU” switch to switch among the 
windshield adjusting function, grip warmer ad-
justing function, seat heater adjusting function, 
and information display selection function.

TIP

 

For XP560E: The windshield, grip warmer, and 
seat heater cannot be selected. However, the 
grip warmer can be selected by attaching acces-
sory parts.

 

Adjusting the windshield position
To move the windshield up, push the “

” side of 

the select switch. To move the windshield down, 
push the “

” side of the select switch.

Adjusting the grip warmer
This vehicle can be equipped with grip warmers, 
which can only be used when the engine is run-
ning. There are 4 grip warmer settings.

To increase the grip warmer temperature, push 
the “

” side of the select switch. To decrease 

the grip warmer temperature, push the “

” side 

of the select switch.

NOTICE

ECA27031

• Be sure to wear gloves when using the grip 

warmers.

• Do not use the grip warmers in warm 

weather.

• If the handlebar grip or throttle grip be-

comes worn or damaged, stop using the 
grip warmers and replace the grips.

 

Adjusting the seat heater
This vehicle can be equipped with a seat heater, 
which can only be used when the vehicle is run-
ning. There are 4 seat heater settings.

To increase the seat heater temperature, push 
the “

” side of the select switch. To decrease 

the seat heater temperature, push the “

” side 

of the select switch.

XP560D (RUS)

NOTICE

ECA27070

• Be sure to wear protective clothing that 

covers your hip and legs when using the 
seat heater.

• Do not use the seat heater in warm weather.
• If the seat becomes worn or damaged, stop 

using the seat heater and replace the seat.

 

XP560D (ZAF)

NOTICE

ECA27041

•  Be sure to wear protective clothing that 

covers your hip and legs when using the 
seat heater.

•  If the ambient temperature is 20 

C (68 

F) 

or higher, do not set the seat heater to the 
high setting.

•  If the seat becomes worn or damaged, stop 

using the seat heater and replace the seat.

 

Changing the information display
The information display items are grouped into 3 
display pages.

Setting

Display

Off

Low

Middle

High

Setting

Display

Off

Low

Middle

High

Содержание XP560D

















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды