manualshive.com logo in svg

Yamaha XMAX Sport, Руководство пользователя

Поделиться
Скачать
Yamaha XMAX Sport Скачать руководство пользователя страница 71

EAU23291

Checking the wheel bearings

The front and rear wheel bearings
must be checked at the intervals spe-
cified in the periodic maintenance and
lubrication chart. If there is play in the
wheel hub or if the wheel does not
turn smoothly, have a Yamaha dealer
check the wheel bearings.

EAU34225

Battery

1. Positive battery terminal
2. Negative battery terminal
3. Battery 

The battery is located behind cowling
A. (See page 6-8). 
This model is equipped with a VRLA
(Valve Regulated Lead Acid) battery.
There is no need to check the elec-
trolyte or to add distilled water. Howe-
ver, the battery lead connections
need to be checked and, if necessary,
tightened.

EWA10760

G

Electrolyte is poisonous and
dangerous since it contains

sulfuric acid, which causes
severe burns. Avoid any con-
tact with skin, eyes or clothing
and always shield your eyes
when working near batteries.
In case of contact, administer
the following FIRST AID.

•

EXTERNAL: Flush with plenty
of water.

•

INTERNAL: Drink large quan-
tities of water or milk and
immediately call a physician.

•

EYES: Flush with water for 15
minutes and seek prompt
medical attention.

G

Batteries produce explosive
hydrogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and pro-
vide sufficient ventilation when
charging it in an enclosed spa-
ce.

G

KEEP THIS AND ALL BATTE-
RIES OUT OF THE REACH OF
CHILDREN.

WARNING

PERIODIC MAINTENANCE AND ADJUSTMENT

6-25

6

Содержание XMAX Sport



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды