manualshive.com logo in svg

Yamaha XMAX Sport, Руководство пользователя

Поделиться
Скачать
Yamaha XMAX Sport Скачать руководство пользователя страница 54

EAU18740

Removing and installing the
cowling and panel

1. Cowling A
2. Panel

1. Panel A

The cowling and panel shown above
need to be removed to perform some
of the maintenance jobs described in
this chapter. Refer to this section

each time a cowling or panel needs to
be removed and installed.

EAUS1790

Cowling A

To remove the cowling

1. Remove the panel by pushing it

out from the back side of the
cowling as shown.

2. Remove the screws, and then

pull the cowling off as shown.

1. Cowling A

1. Cowling A

To install the cowling

1. Place the cowling in the original

position, and then install the
screws.

2. Install the panel by pushing it in.

EAUS2040

Panel A

To remove the panel

1. Open the seat. (See page 3-17.)
2. Remove the screws, and then

pull the panel outward.

TIP

For the Sport version, the backrest is
not shown for better understanding.

PERIODIC MAINTENANCE AND ADJUSTMENT

6-8

6

Содержание XMAX Sport



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды