background image

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-3

EAU17705

Periodic maintenance and lubrication chart

NOTE:

The annual checks must be performed every year, except if a kilometer-based maintenance is performed
instead.

From 50000 km, repeat the maintenance intervals starting from 10000 km.

Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and
technical skills.

ODOMETER READING (x 1000 Km)

ANNUAL

NO.

ITEM

CHECK OR MAINTENANCE JOB

CHECK

1

10

20

30

40

1 *

Fuel line

•Check fuel hoses for cracks or damage.

•Check condition.

2

Spark plug

•Clean and regap.

•Replace.

3 *

Valves

•Check valve clearance.
•Adjust.

4

Air filter element

•Replace.

5 *

V-belt case air filter 

•Clean.

elements

•Replace.

6 *

Front brake

•Check operation, fluid level and vehicle for fluid leakage.

•Replace brake pads.

Whenever worn to the limit

7 *

Rear brake

•Check operation, fluid level and vehicle for fluid leakage.

•Replace brake pads.

Whenever worn to the limit

1C0-F8199-E2.qxd  06/03/2006 13:08  Página 42

Содержание Xmax 250



















































































Отзывы: