Yamaha Xmax 250, Руководство пользователя

Страница: 23 / 82

EAU12344
Handlebar switches
1. Dimmer switch “
jk
”
2. Pass switch "PASSING"
3. Turn signal switch “
cd
”
4. Horn switch “
a
”
1. Starting switch “
g
”
2. Hazard switch “ ”
EAUS1300
Pass switch “PASSING”
Press this switch to flash the head-
light.
EAUS1020
Dimmer switch “
j
/
k
”
Set this switch to “
j
” for the high
beam and to “
k
” for the low beam.
With the headlight on low beam,
press this switch downwards to flash
the headlight.
EAU12460
Turn signal switch “
c
/
d
”
To signal a right-hand turn, push this
switch to “
d
”. To signal a left-hand
turn, push this switch to “
c
”. When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
EAU12500
Horn switch “
a
”
Press this switch to sound the horn.
EAU12720
Start switch “
g
”
With the sidestand up, push this
switch while applying the front or rear
brake to crank the engine with the
starter.
ECA10050
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAUM1990
Hazard switch “ ”, “
h
”
With the key in the “ON” position, set
this switch to “
” to turn on the
hazard lighting (simultaneous flashing
of all turn signal lights). To turn off the
hazard lighting, set this switch to “
h
”
and, then turn the key to “OFF”.
NOTE:
Even if the key is turned from “ON” to
“OFF” with the hazard lighting on, the
hazard lighting will continue to flash
regardless of the hazard switch posi-
tion. To cancel the hazard lighting, the
key must be turned to “ON” and the
hazard switch must be set to the “
h
”
position.
1 2
1
2
3
4
3
INSTRUMENT AND CONTROL FUNCTIONS
3-9
1C0-F8199-E2.qxd 06/03/2006 13:08 Página 3-9