Yamaha XMAX 125 Скачать руководство пользователя страница 40

Страница: 40 / 94

INSTRUMENT AND CONTROL FUNCTIONS

3-24

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Keep the front or rear brake applied.
5. Push the start switch.
Does the engine start?

With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.
Does the engine start?

With the engine still running:
9. Move the sidestand down.
Does the engine stall?

The system is OK. The scooter can be ridden.

The sidestand switch may not be working correctly.
The scooter should not be ridden until
checked by a Yamaha dealer.

YES

The brake switch may not be working correctly.
The scooter should not be ridden until
checked by a Yamaha dealer.

•

The vehicle must be placed on the center-

stand during this inspection.

•

If a malfunction is noted, have a Yamaha

dealer check the system before riding.

WARNING

U2DME1E0.book Page 24 Wednesday, October 23, 2013 1:37 PM

Содержание XMAX 125































































































Результаты поиска

Содержание XMAX 125

Отзывы:

Похожие инструкции для XMAX 125

Бренды по названию

Популярные бренды

Yamaha XMAX 125, Руководство пользователя

Результаты поиска

Содержание XMAX 125

Отзывы:

Похожие инструкции для XMAX 125

Бренды по названию

Популярные бренды