INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
Clock
To set the clock:
1. Push the “SELECT” button for 3
seconds, and the hour digits will
start flashing.
2. Use the “SELECT” button to set
the hours.
3. Push the “SELECT” button for 3
seconds, and the minute digits will
start flashing.
4. Use the “SELECT” button to set
the minutes.
5. Push the “SELECT” button for 3
seconds to complete setting the
clock.
O
d
ometer an
d
tripmeter
d
isplay
The odometer and tripmeter display is
equipped with the following:
a tripmeter (which shows the dis-
tance traveled since last set to ze-
ro)
a time tripmeter (which shows the
elapsed riding time since last set
to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
an oil change tripmeter (which
shows the distance traveled since
the last engine oil change)
a V-belt replacement tripmeter
(which shows the distance trav-
eled since the last V-belt replace-
ment)
Pushing the “TRIP” button switches
the display between the odometer
mode and the various tripmeter modes
in the following order:
Odo (odometer)
→
Trip (tripmeter)
→
Trip Time (time tripmeter)
→
Oil (oil
change tripmeter)
→
V-Belt (v-belt re-
placement tripmeter)
→
Odo (odome-
ter)
When approximately 2.5 L (0.66 US
gal, 0.55 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode “F Trip” and start counting the
distance traveled from that point. In
that case, pushing the “TRIP” button
switches the display between the vari-
ous tripmeter and odometer modes in
the following order:
Odo
→
Trip
→
Trip Time
→
F Trip (fuel
reserve tripmeter)
→
Oil Trip
→
V-Belt
Trip
→
Odo
1. “TRIP/INFO” switch
2. Function display
ZAUM1104
C H
km
Odo
Air
Oil
V-Belt
Time
Trip
Odo
F
2
1
INFO
TRIP
U2DME1E0.book Page 7 Wednesday, October 23, 2013 1:37 PM