Yamaha XLT1200 WaveRunner 2003 Скачать руководство пользователя | Manualshive

Страница: 13 / 138

background image

1-8

E

EJU01177

Safety information

The safe use and operation of this

watercraft is dependent upon the use of
proper riding techniques, as well as upon
the common sense, good judgment, and
expertise of the operator. Every operator
should know the following requirements
before riding the watercraft.

●

Before operating the watercraft, read the
Owner’s/Operator’s Manual, the Riding
Practice Guide, the Riding Instruction
card and all warning and caution labels
on the watercraft. Also, watch the Basic
Orientation Video provided with your
watercraft. These materials should give
you an understanding of the watercraft
and its operation.

●

Never allow anyone to operate this water-
craft until they too have read the Owner’s/
Operator’s Manual, the Riding Practice
Guide, the Riding Instruction card and all
warning and caution labels, and if possi-
ble watched the Basic Orientation Video.
Showing them the video may help rein-
force the information contained in these
materials.

EJU01159

Limitations on who may
operate the watercraft

●

Yamaha recommends a minimum opera-
tor age of 16 years old.
Adults must supervise use by minors.
Know the operator age and training
requirements for your state. A boating
safety course is recommended and may
be required in your state. You can find
local rules by contacting the United
States Coast Guard (USCG), the National
Association of State Boating Law Admin-
istrators, or your local Power Squadron.

●

This watercraft is designed to carry the
operator and up to 2 passengers. Never
exceed the maximum load limit or allow
more than 3 persons (or 2 persons if a
water-skier is being pulled) to ride the
watercraft at one time.

●

Do not operate the watercraft with any
passengers on board until you have con-
siderable practice and experience riding
alone. Operating the watercraft with pas-
sengers requires more skill. Take the time
to become accustomed to the handling
characteristics of the watercraft before
trying any difficult maneuvers.

Maximum load: 240 kg (530 lb)

Load is the total weight of cargo,
operator and passengers.

E_F0V-12-1.fm Page 8 Wednesday, July 10, 2002 5:10 PM

«
...
11
12
13
14
15
...
»

Содержание XLT1200 WaveRunner 2003











































































































































Отзывы:

Нет отзывов

Похожие инструкции для XLT1200 WaveRunner 2003

Бренд: C&C Yachts Страницы: 44

Бренд: Hobie Страницы: 16

NARAK CROSS 405

Бренд: Nautiraid Страницы: 16

Бренд: Grady-White Boats Страницы: 62

Бренд: Grady-White Boats Страницы: 68

Бренд: Grady-White Boats Страницы: 123

Бренд: Sea-doo Страницы: 456

Бренд: Kingfisher Страницы: 69

Бренд: Malibu Boats Страницы: 64

Бренд: HydroBikes Страницы: 24

Бренд: TAKACAT Страницы: 14

Бренд: Point 65 Страницы: 2

Бренд: Point 65 Страницы: 3

Бренд: Point 65 Страницы: 8

Jet Jam PRB08031

Бренд: ProBoat Страницы: 15

Бренд: ProBoat Страницы: 17

Hard Fabric Line

Бренд: SEVEN BASS DESIGN Страницы: 4

OMA-P5080-040401

Бренд: orangemarine Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды