INSTRUMENT AND CONTROL FUNCTIONS
3-19
3
3. While holding the key in that posi-
tion, lift the rear of the seat up, and
then pull the seat off.
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown.
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
4. Install the carrier by installing the
bolts and nuts, and then tighten
the nuts to the specified torque.
EAU47260
Rear view mirrors
The rear view mirrors of this vehicle can
be folded forward for parking in narrow
spaces. Fold the mirrors back to their
original position before riding.
WARNING
EWA14371
Be sure to fold the rear view mirrors
back to their original position before
riding.
1. Seat lock
2. Unlock.
1
2
1. Projection
2. Seat holder
Tightening torque:
Carrier nut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
1
2
1. Riding position
2. Parking position
1
2
2
1
U1PWEAE0.book Page 19 Tuesday, February 7, 2012 4:21 PM
