Yamaha XJ6SAP Скачать руководство пользователя | Manualshive

Страница: 10 / 102

background image

SAFETY INFORMATION

1-3

1

the possibility of an accident, use ex-
treme caution when adding cargo or
accessories to your motorcycle. Use
extra care when riding a motorcycle
that has added cargo or accessories.
Here, along with the information about
accessories below, are some general
guidelines to follow if loading cargo to
your motorcycle:
The total weight of the operator, acces-
sories and cargo must not exceed the
maximum load limit.

Operation of an

overloaded vehicle could cause an
accident.

When loading within this weight limit,
keep the following in mind:

●

Cargo and accessory weight
should be kept as low and close to
the motorcycle as possible. Se-
curely pack your heaviest items as
close to the center of the vehicle as
possible and make sure to distrib-
ute the weight as evenly as possi-

ble on both sides of the motorcycle
to minimize imbalance or instabili-
ty.

●

Shifting weights can create a sud-
den imbalance. Make sure that ac-
cessories and cargo are securely
attached to the motorcycle before
riding. Check accessory mounts
and cargo restraints frequently.

• Properly adjust the suspension

for your load (suspension-ad-
justable models only), and
check the condition and pres-
sure of your tires.

• Never attach any large or heavy

items to the handlebar, front
fork, or front fender. These
items, including such cargo as
sleeping bags, duffel bags, or
tents, can create unstable han-
dling or a slow steering re-
sponse.

●

This vehicle is not designed to
pull a trailer or to be attached to
a sidecar.

Genuine Yamaha Accessories

Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are avail-
able only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection to
Yamaha manufacture parts and acces-
sories or offer other modifications for
Yamaha vehicles. Yamaha is not in a
position to test the products that these
aftermarket companies produce.
Therefore, Yamaha can neither en-
dorse nor recommend the use of ac-
cessories not sold by Yamaha or
modifications not specifically recom-
mended by Yamaha, even if sold and
installed by a Yamaha dealer.

Aftermarket Parts, Accessories, and
Modifications

While you may find aftermarket prod-
ucts similar in design and quality to
genuine Yamaha accessories, recog-
nize that some aftermarket accessories
or modifications are not suitable be-
cause of potential safety hazards to you
or others. Installing aftermarket prod-

Maximum load:

184 kg (406 lb)

U1PWEAE0.book Page 3 Tuesday, February 7, 2012 4:21 PM

«
...
8
9
10
11
12
...
»

Содержание XJ6SAP







































































































Отзывы:

Нет отзывов

Похожие инструкции для XJ6SAP

Бренд: Würth Страницы: 188

Бренд: B-PWR Страницы: 13

Бренд: AFX Страницы: 52

Бренд: Yamaha Страницы: 104

Super Tenere ABS 2018

Бренд: Yamaha Страницы: 122

Бренд: Yamaha Страницы: 124

Бренд: Yamaha Страницы: 97

Бренд: Yamaha Страницы: 172

Бренд: Yamaha Страницы: 80

Бренд: hepco & becker Страницы: 4

6304541 00 02 chrom

Бренд: hepco & becker Страницы: 6

Бренд: hepco & becker Страницы: 4

Бренд: GÜDE Страницы: 80

Бренд: GÜDE Страницы: 88

Бренд: Johnny Pag Страницы: 26

Бренд: ArcPro Страницы: 7

RSV MILLE - PART 1 1999

Бренд: APRILIA Страницы: 4

RSV4 BROCHURE 2009

Бренд: APRILIA Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды