1
2
3
4
5
6
7
8
9
6-8
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
To install the panel
1. Place the panel in the original po-
sition, and then install the screws.
2. Install the luggage holder by
installing the screws, and then
tighten the screws to the speci-
fi ed torque.
Tightening torque:
Luggage holder screws:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
EAUT3610
Panel B
To remove the panel
Remove the screws and quick fas-
tener, and then take the panel off.
1
2
1. Panel
B
2. Quick
fastener
To install the panel
Place the panel in the original posi-
tion, and then install the quick fasten-
er and screws.
EAUT3620
Panel C
To remove the panel
1. Open the seat. (See page 3-11.)
2. Remove the screws, and then
pull the panel off as shown.
1
1. Panel
C
To install the panel
1
1. Projection
1. Insert the projections on the pan-
el into the slots as shown, and
then install the screws.
2. Close the seat.
53B-F8199-E0_CS.indd 6-8
53B-F8199-E0_CS.indd 6-8
2011/11/01 12:32:09
2011/11/01 12:32:09
Process Black
Process Black