background image

1

2

3

4

5

6

7

8

9

3-3

EAU1044E

INSTRUMENT AND CONTROL FUNCTIONS

to the coolant temperature in the 
radiator.

 

If the engine overheats, see page 
6-34 for further instructions.

EAUT1934

Engine trouble warning light “

This warning light fl ashes or stays on 
if an electrical circuit monitoring the 
engine is not working correctly. If this 
occurs, have a Yamaha dealer check 
the self-diagnosis system.
The electrical circuit of the warning 
light can be checked by turning the 
key to “ON”. The warning light should 
come on for a few seconds, and then 
go off.
If the warning light does not come 
on initially when the key is turned to 
“ON”, or if the warning light remains 
on, have a Yamaha dealer check the 
electrical circuit.

EAUT3721

Multi-function display

SELECT

RESET

ODO

OIL TRIP 

1

 BELT TRI

2

OIL CHANGE

CLOOK

OUT TEM

P

1 2 3 4 5 6

7

8 9

10 12

11

1.  V-belt replacement indicator “V-BELT”
2. Clock
3.  Oil change indicator “OIL CHANGE”
4. “SELECT” 

button

5.  Fuel level warning indicator “

6. Fuel 

meter

7. Speedometer
8. Odometer
9. “RESET” 

button

10. Tripmeter 1
11. Ambient temperature display
12. Tripmeter 2

EWA14431

WARNING

Be sure to stop the vehicle before 
making any setting changes to the 
multi-function display. Changing 
settings while riding can distract 
the operator and increase the risk 

of an accident.

The multi-function display is equipped 
with the following:

 an odometer

  a fuel reserve tripmeter (which 

shows the distance traveled since 
the bottom segment of the fuel 
meter and fuel level warning indi-
cator started fl ashing)

  two tripmeters (which show the 

distance traveled since they were 
last set to zero)

  an oil change tripmeter (which 

shows the distance traveled since 
the last engine oil change)

  an oil change indicator (which dis-

plays when the engine oil should 
be changed)

  a V-belt replacement tripmeter 

(which shows the distance trav-
eled since the V-belt was last re-
placed)

  a V-belt replacement indicator

  an ambient temperature display

 a clock

  a fuel meter

53B-F8199-E0_CS.indd   3-3

53B-F8199-E0_CS.indd   3-3

2011/11/01   12:32:08

2011/11/01   12:32:08

Process Black

Process Black

Содержание xenter HW125





















































































Отзывы: