Yamaha X-MAX 125 ABS 2018, Руководство пользователя

Страница: 76 / 114

Perio d ic maintenance an d a d justment
7-13
7
3. If the coolant is at or below the
minimum level mark, remove the
left floorboard mat by pulling it up.
4. Remove the coolant reservoir cov-
er.
5. Remove the coolant reservoir cap,
add coolant to the maximum level
mark, and then install the reservoir
cap.
WARNING! Remove only
the coolant reservoir cap. Never
attempt to remove the ra
d iator
cap when the en g ine is hot.
[EWA15162]
NOTICE:
If coolant is not
availa b le, use d istille d water or
soft tap water instea d . Do not
use har d water or salt water
since it is harmful to the en g ine.
If water has b een use d instea d
of coolant, replace it with cool-
ant as soon as possi
b le, other-
wise the coolin g system will not
b e protecte d a g ainst frost an d
corrosion. If water has b een
a dd e d to the coolant, have a
Yamaha d ealer check the anti-
freeze content of the coolant as
soon as possi
b le, otherwise the
effectiveness of the coolant will
b e re d uce d .
[ECA10473]
6. Install the coolant reservoir cover.
7. Place the left floorboard mat in the
original position and push it down-
ward to secure it.
EAU33032
Chan g in g the coolant
The coolant must be changed at the in-
tervals specified in the periodic mainte-
nance and lubrication chart. Have a
Yamaha dealer change the coolant.
WARNING! Never attempt to remove
the ra
d iator cap when the en g ine is
hot.
[EWA10382]
1. Floorboard mat
1. Coolant reservoir cover
1
1
1. Coolant reservoir cap
Coolant reservoir capacity (up to
the maximum level mark):
0.18 L (0.19 US qt, 0.16 Imp.qt)
1
UBL2E0E0.book Page 13 Friday, June 23, 2017 9:30 AM