INSP
ADJ
23
REAR SHOCK ABSORBER SPRING PRELOAD
ADJUSTMENT
REAR SHOCK ABSORBER SPRING
PRELOAD ADJUSTMENT
1. Elevate the rear wheel by placing the suitable
stand under the engine.
2. Remove:
• Rear frame
3. Loosen:
• Locknut
1
4. Adjust:
• Spring preload
By turning the adjuster
2
.
Stiffer
→
Increase the spring preload.
(Turn the adjuster
2
in.)
Softer
→
Decrease the spring preload.
(Turn the adjuster
2
out.)
Spring length (installed):
Standard length
Extent of adjustment
251.5 mm
246.5~256.5 mm
NOTE:
• Be sure to remove all dirt and mud from around
the locknut and adjuster before adjustment.
• The lenght of the spring (installed) changes 1.5
mm (0.06 in) per turn of the adjuster.
Never attempt to turn the adjuster beyond the
maximum or minimium setting.
5. Tighten:
• Locknut
6. Install:
• Rear frame (upper)
• Rear frame (lower)
CAUTION:
32 Nm (3.2 m•kg, 23 ft•lb)
29 Nm (2.9 m•kg, 21 ft•lb)
1
2
