INSP
ADJ
STEERING DAMPER ADJUSTMENT
19
Damping sweep controls
Damping sweep controls
5
are located on each
side off the damper body. Damping is in position 2,
(12 o´clock), when delivered from Yamaha. This
setting is fitted for enduro, motocross and off-road
riding.
WARNING
Always ensure that valve setting is within the
permitted ranges.
NOTE:
Both damping sweep controls must always be set
in identical positions. Always use positions
according to the clock.
Suitable starting position:
Motocross
pos. 1 or 2
Enduro
pos. 2 or 3
Off-Road
pos. 2, 3 or 4
Technical data
External measures
70x70x35 mm
Seals
Low friction type
Oil
Öhlins part no. 01306-01
Maintenance and inspection
The steering damper is a precision instrument,
with extremely fine tolerances. It is therefore es-
sential that it is maintained in a correct manner.
Maintenance and service should be carried out by
an authorised service center.
NOTE:
After washing the motorcycle wipe clean and
spray with all-round oil.
Never subject to direct high-pressure cleaning
since water may otherwise penetrate the
damper.
Ensure that there is no leakage of fluid and
that there is no visible damage to the housing
and mounts.
CAUTION:
CAUTION:
