manualshive.com logo in svg

Yamaha WOLVERINE RMAX4, Руководство пользователя, Страница: 72 / 196

Поделиться
Скачать
Yamaha WOLVERINE RMAX4 Скачать руководство пользователя страница 72

5-40

5

To use an auxiliary DC jack

1. Start the engine. (See page 7-2.)
2. Turn the headlights off. (See page 5-16.)
3. Make sure the accessory is off.
4. Open the auxiliary DC jack cap.
5. Insert the accessory power plug into the

jack.

6. Turn the accessory on.

TIP

Turn off the accessory before plugging in-
to/unplugging from the jack.

When the auxiliary DC jack is not being
used, cover it with the cap.

 

NOTICE

ECB02111

The combined load of the accessories
connected to the front and rear auxiliary
DC jacks must never exceed the stated
maximum capacity. Exceeding the maxi-
mum capacity may overload the circuit
and cause the fuse to blow.

If accessories are used while the head-
lights are on and/or without the engine
running, the battery may discharge.

Do not use an automotive cigarette light-
er or other accessories with a plug that
gets hot, because the jack can be dam-
aged.

 

EBU39460

Auxiliary DC connectors

This vehicle is equipped with auxiliary DC
connectors. Consult your Yamaha dealer be-
fore installing any accessories.

EBU39921

SSV Works

®

 audio system

This vehicle is equipped with SSV Works

®

audio system. Read the SSV Works

®

 MRB3

User Guide for more information.

UB4J11E0.book  Page 40  Thursday, July 23, 2020  10:22 AM

Содержание WOLVERINE RMAX4





































































































































































































Отзывы:

Нет отзывов