Yamaha WOLVERINE RMAX4 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 196

Yamaha WOLVERINE RMAX4 Скачать руководство пользователя страница 23

3-2

3

• This vehicle is designed to carry the driver and three passengers. Never carry passengers in

the cargo bed.

• The driver and passengers should wear seat belts properly.
• The driver and passengers must be able to put both feet flat on the floorboard while seated

upright with their backs against the backrests. The passengers must be able to reach and
hold the passenger handhold within the cage/frame.

• The driver and passengers should wear an approved motorcycle helmet that fits properly.

The driver and passengers should also wear eye protection (goggles or a face shield), gloves,
over-the-ankle boots, long-sleeved shirt or jacket, and long pants.

• Do not drive or ride as a passenger after using drugs or alcohol.

DRIVER
UNDER

16

UB4J11E0.book Page 2 Thursday, July 23, 2020 10:22 AM

«
...
21
22
23
24
25
...
»

Содержание WOLVERINE RMAX4





































































































































































































Отзывы:

Нет отзывов