manualshive.com logo in svg

Yamaha Wild Star XV1600A, Руководство пользователя, Страница: 88 / 104

Поделиться
Скачать
Yamaha Wild Star XV1600A Скачать руководство пользователя страница 88

MOTORCYCLE CARE AND STORAGE

7-3

7

After riding in the rain, near the sea or
on salt-sprayed roads
Since sea salt or salt sprayed on roads
during winter are extremely corrosive in
combination with water, carry out the
following steps after each ride in the
rain, near the sea or on salt-sprayed
roads.

NOTE:

@ 

Salt sprayed on roads in the winter may
remain well into spring. 

@

1. Clean the motorcycle with cold

water and a mild detergent, after
the engine has cooled down.

ECA00012

CAUTION:

@ 

Do not use warm water since it in-
creases the corrosive action of the
salt. 

@

2. After drying the motorcycle, apply

a corrosion protection spray on all
metal, including chrome- and nick-
el-plated, surfaces to prevent cor-
rosion.

After cleaning

1. Dry the motorcycle with a chamois

or an absorbing cloth.

2. Use a chrome polish to shine

chrome, aluminum and stainless-
steel parts, including the exhaust
system. (Even the thermally in-
duced discoloring of stainless-
steel exhaust systems can be re-
moved through polishing.)

3. To prevent corrosion, it is recom-

mended to apply a corrosion pro-
tection spray on all metal,
including chrome- and nickel-plat-
ed, surfaces.

4. Use spray oil as a universal clean-

er to remove any remaining dirt.

5. Touch up minor paint damage

caused by stones, etc.

6. Wax all painted surfaces.
7. Let the motorcycle dry completely

before storing or covering it.

EWA00001

WARNING

@ 

●

Make sure that there is no oil or
wax on the brakes or tires. If
necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent.

●

Before operating the motor-
cycle test its braking perfor-
mance and cornering behavior. 

@

E_5JA.book  Page 3  Wednesday, September 13, 2000  6:06 PM

Содержание Wild Star XV1600A









































































































Отзывы:

Нет отзывов