manualshive.com logo in svg

Yamaha Wild Star XV1600A, Руководство пользователя, Страница: 28 / 104

Поделиться
Скачать
Yamaha Wild Star XV1600A Скачать руководство пользователя страница 28

INSTRUMENT AND CONTROL FUNCTIONS

3-13

3

To install the rider seat

1. Insert the projection on the rear of

the rider seat into the seat holder
as shown, and then push the front
of the seat down to lock it in place. 

2. Remove the key from the main

switch if the motorcycle will be left
unattended.

NOTE:

@ 

Make sure that the rider seat is proper-
ly secured before riding. 

@

EAU01819

Helmet holder 

The helmet holder is located under the
rider seat.

To secure a helmet to the helmet
holder

1. Remove the rider seat. (See page

3-12 for rider seat removal and in-
stallation procedures.)

2. Attach the helmet to the helmet

holder, and then securely install
the seat.

EW000030

WARNING

@ 

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident. 

@

To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.

1. Projection
2. Seat holder

1. Helmet holder

E_5JA.book  Page 13  Wednesday, September 13, 2000  6:06 PM

Содержание Wild Star XV1600A









































































































Отзывы:

Нет отзывов