Yamaha WaveRunner GP1800 2017 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 106

background image

Safety information

15

EJU42474

Hazard information



Never start the engine or let it run for any
length of time in an enclosed area. Exhaust
fumes contain carbon monoxide, a color-
less, odorless gas that may cause loss of
consciousness and death within a short
time. Always operate the watercraft in an
open area.



Do not touch the hot muffler or engine dur-
ing or immediately after engine operation;
they can cause serious burns.



Do not place magnets or objects with a
strong magnetic force near the throttle le-
ver or RiDE lever. The electronic throttle
mechanism of the levers can be adversely
affected, which could cause loss of control.
In addition, do not place objects suscepti-
ble to magnetic forces (i.e., credit cards,
watches, etc.) close to the throttle lever or
RiDE lever.

EJU42414

Watercraft characteristics



Jet thrust turns the watercraft. Releasing
the throttle lever completely produces only
minimum thrust. If you are traveling at
speeds above trolling, you will have rapidly
decreasing ability to steer without throttle.
This model is equipped with the Yamaha
Engine Management System (YEMS) that
includes an off-throttle steering (OTS) sys-
tem. It will activate at planing speeds
should you attempt to steer the watercraft
after releasing the throttle lever. The OTS
system assists in turning by continuing to
supply some thrust while the watercraft is
decelerating, but you can turn more sharp-
ly if you apply throttle while turning the han-
dlebars.
The OTS system does not function below
planing speeds or when the engine is off.
Once the engine slows down, the water-
craft will no longer turn in response to han-
dlebar input until you apply throttle again or
you reach trolling speed.
Practice turning in an open area without
obstacles until you have a good feel for this
maneuver.



This watercraft is water-jet propelled. The
jet pump is directly connected to the en-
gine. This means that jet thrust will produce
some movement whenever the engine is
running and the “F” (forward) or “R” (re-
verse) shift indicator is displayed in the
multifunction display. When the “N” (neu-
tral) shift indicator is displayed, the forward
and reverse thrust are balanced to help
keep the watercraft from moving in either

UF3P70E0.book Page 15 Friday, September 2, 2016 11:32 AM

«
...
19
20
21
22
23
...
»

Содержание WaveRunner GP1800 2017











































































































Отзывы:

Нет отзывов

Похожие инструкции для WaveRunner GP1800 2017

Sea-Doo GTI 2008 Series

Бренд: BRP Страницы: 29

Бренд: COBIA Страницы: 39

Бренд: Cobalt Digital Inc Страницы: 136

Бренд: Quantum Sails Страницы: 11

Бренд: Malibu Boats Страницы: 309

Бренд: Access Dinghy Страницы: 27

Бренд: Hunter Страницы: 164

Бренд: Polaris Страницы: 114

Бренд: Ocean Kayak Страницы: 5

Бренд: Garcia Yachting Страницы: 60

Бренд: Jeanneau Страницы: 46

Бренд: Malibukayaks Страницы: 23

Бренд: Vanguard Страницы: 12

600 DAY CRUISER 15

Бренд: Coaster Страницы: 39

Бренд: Bavaria Страницы: 27

Бренд: Axopar Страницы: 118

Бренд: Westport Страницы: 12

Seaswirl Series

Бренд: Striper Страницы: 148

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды