16
VXS3SB / VXS3SW / CMA3SB / CMA3SW
Owner's Manual
Painting
When painting the VXS3S, we recommend using acrylic lacquer paint.
Refer to the paint's instructions for details on how to apply the paint.
CAUTION
Work in an area that has adequate ventilation.
NOTICE
• Painting procedures often require the use of volatile solvents that can cause fire. Follow
all necessary safety precautions to avoid any risk of a fire or accident.
• Yamaha cannot be held responsible for any damage to the speaker as a result of
painting.
Painting the grille
1
Remove the grille from the speaker, taking care not to scratch it.
2
Remove the emblem on the front of the grille.
The emblem is attached by adhesive tape.
3
Tuck the included masking sheet under the crosspiece on the back
of the grille and insert the masking sheet.
NOTE
Make sure the areas shown below are covered.
4
Apply the paint to the grille.
NOTE
Make sure the holes in the grille do not become clogged with paint.
If the holes become clogged with paint, sound quality may be affected.
5
When the paint is completely dry, remove the masking sheet and
attach the emblem to the grille.
Make sure the emblem is attached in the correct position.
6
Attach the grille to the speaker.
Painting the speaker enclosure
1
Remove any dust or dirt with a lint-free cloth.
Do not sand the enclosure.
2
Use spray paint to paint the enclosure.
Cover the baffle and connectors using masking materials to avoid
paint contact.
3
Allow the paint to dry completely.