Yamaha VMAX VMX17 Скачать руководство пользователя страница 94

Страница: 94 / 112

PERIODIC MAINTENANCE AND ADJUSTMENT

6-39

EAU50453

Replacin

a license plate li

1. Remove the holding plate by re-

moving the bolts.

2. Remove the license plate light unit

bolts.

3. Pull the license plate light unit out-

ward as shown to access the bulb
and its socket.

4. Remove the license plate light

bulb socket (together with the
bulb) by turning it counterclock-
wise, and then pulling it out.

5. Remove the burnt-out bulb by

pulling it out.

6. Insert a new bulb into the socket.
7. Install the socket (together with

the bulb) by pushing it in, and then
turning it clockwise until it stops.

8. Place the license plate light unit in

the original position, and then in-
stall the bolts.

9. Install the holding plate by install-

ing the bolts.

1. Holding plate
2. Bolt

1. License plate light unit bolt
2. License plate light unit

1. License plate light bulb socket
2. License plate light unit

1. License plate light bulb

U2CEE0E0.book Page 39 Wednesday, August 27, 2014 11:11 AM

Содержание VMAX VMX17

















































































































Результаты поиска

Содержание VMAX VMX17

Отзывы:

Yamaha VMAX VMX17, Руководство пользователя, Страница: 94 / 112

Результаты поиска

Содержание VMAX VMX17

Отзывы: