Yamaha VMAX VMX17 Скачать руководство пользователя страница 87

Страница: 87 / 112

PERIODIC MAINTENANCE AND ADJUSTMENT

6-32

• EYES: Flush with water for 15

minutes an

seek prompt

ical attention.



Batteries pro

uce explosive hy-

as. Therefore, keep

sparks, flames, ci

arettes, etc.,

away from the

attery an

pro-

e sufficient ventilation when

char

it in an enclose

space.



KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

To remove the

attery

1. Remove cowling A. (See page

6-8.)

2. Disconnect the negative battery

lead first, then the positive battery
lead by removing their bolt.

NOTICE:

When removin

the

attery,

e sure the key is

turne

to “OFF”, then

iscon-

nect the ne

ative lea

efore

isconnectin

the positive lea

[ECA16303]

3. Remove the battery cover bolts,

lift the battery cover (together with
the ECU), then move the cover to
the side.

4. Remove the main fuse (together

with the holding band) from its
holder.

5. Disconnect coupler A.

6. Remove the rubber damper.

1. Negative battery lead (black)
2. Positive battery lead (red)

1. Battery cover bolt
2. Battery cover

1. Main fuse
2. Holding band
3. Coupler A

1. Rubber damper

U2CEE0E0.book Page 32 Wednesday, August 27, 2014 11:11 AM

Содержание VMAX VMX17

















































































































Результаты поиска

Содержание VMAX VMX17

Отзывы:

Yamaha VMAX VMX17, Руководство пользователя, Страница: 87 / 112

Результаты поиска

Содержание VMAX VMX17

Отзывы: