Yamaha VITY XC125E Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 76

Yamaha VITY XC125E Скачать руководство пользователя страница 51

PERIODIC MAINTENANCE AND MINOR REPAIR

6-16

6

WARNING

EWA11200

Because loading has an enormous
impact on the handling, braking,
performance and safety characteris-
tics of your vehicle, you should keep
the following precautions in mind.

●

NEVER OVERLOAD THE VEHI-
CLE! Operation of an overload-
ed vehicle may result in tire
damage, loss of control, or se-
vere injury. Make sure that the
total weight of rider, passenger,

cargo, and accessories does
not exceed the specified maxi-
mum load for the vehicle.

●

Do not carry along loosely
packed items, which can shift
during a ride.

●

Securely pack the heaviest
items close to the center of the
vehicle and distribute the
weight evenly on both sides.

●

Adjust the tire air pressure with
regard to the load.

●

Check the tire condition and air
pressure before each ride.

Tire inspection

The tires must be checked before each
ride. If the center tread depth reaches
the specified limit, if the tire has a nail or
glass fragments in it, or if the sidewall is
cracked, have a Yamaha dealer re-
place the tire immediately.

NOTE:

The tire tread depth limits may differ
from country to country. Always comply
with the local regulations.

Tire information

This model is equipped with tubeless
tires.

Tire air pressure (measured on cold
tires):

0–83 kg (0–183 lb):

Front:

175 kPa (25 psi) (1.75 kgf/cm²)

Rear:

200 kPa (29 psi) (2.00 kgf/cm²)

83–167 kg (183–368 lb):

Front:

175 kPa (25 psi) (1.75 kgf/cm²)

Rear:

250 kPa (36 psi) (2.50 kgf/cm²)

Maximum load*:

167 kg (368 lb)

* Total weight of rider, passenger, car-

go and accessories

1. Tire sidewall

2. Tire tread depth

Minimum tire tread depth (front and
rear):

1.6 mm (0.06 in)

Front tire:

Size:

100/90-10 56J

Manufacturer/model:

CHENG SHIN/C-922

Rear tire:

Size:

100/90-10 56J

Manufacturer/model:

CHENG SHIN/C-940

U4P7E1E0.book Page 16 Wednesday, December 12, 2007 9:37 AM

«
...
49
50
51
52
53
...
»

Содержание VITY XC125E













































































Отзывы:

Нет отзывов