Yamaha VINO YJ50RAP, Руководство по обслуживанию

Страница: 125 / 228

5 - 6
ENG
CYLINDER HEAD, CYLINDER AND PISTON
EAS00253
REMOVING THE CYLINDER AND PISTON
1. Remove:
• piston pin clip
1
• piston pin
2
• piston
3
CAUTION:
@
Do not use a hammer to drive the piston
pin out.
NOTE:
@
Before removing the piston pin clip, cover the
crankcase opening with a clean rag to prevent
the piston pin clip from falling into the crank-
case.
3
1
2
2. Remove:
• piston ring
NOTE:
@
When removing a piston ring, open the end
gap with your fingers and lift the other side of
the ring over the piston crown.
EAS00227
CHECKING THE CYLINDER HEAD
1. Eliminate:
• combustion chamber carbon deposits
(with a rounded scraper)
NOTE:
@
Do not use a sharp instrument to avoid damag-
ing or scratching:
• spark plug bore threads
2. Check:
• cylinder head
Damage/scratches
→
Replace.
3. Measure:
• cylinder head warpage
Out of specification
→
Resurface the cylin-
der head.
Maximum cylinder head warpage
0.05 mm (0.002 in)
Downloaded
from www.ScooterTime.net