4-8
4
5
6
7
8
9
10
11
12
13
14
To reset a tripmeter, select it by pushing the
“SELECT” button, and then push the “RE-
SET” button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of fu-
el. This information enables you to plan future
fuel stops.
TIP
To switch the display between “mph” and
“km/h”, turn the key to “
” (off), then push
and hold the “SELECT” button while turning
the key to “
” (on).
Clock, hour meter and voltage display
modes
1. “SELECT” button
2. “RESET” button
3. “CLOCK” button
4. Clock/Hour meter/Voltage display
Pushing the “CLOCK” button switches the dis-
play between the clock mode “CLOCK”, the
hour meter mode “HOUR”, and the voltage
display mode “
” in the following order:
CLOCK
→
HOUR
→
→
CLOCK
4
1
2
3
1XP7B_EE.book Page 8 Tuesday, February 4, 2014 3:40 PM