Yamaha Vector RS90GTAX 2008 Скачать руководство пользователя | Manualshive

Страница: 2 / 82

background image

FOREWORD

This Supplementary Service Manual has been
prepared to introduce new service and new
data for the RS90RX/RS90GTX/RS90GTAX/
RS90LTX/RS90LTGTX.
For complete information, on service proce-
dures, it is necessary to use this Supplementary
Service Manual together with following manual:

NOTICE

This manual was written by the Yamaha Motor
Company primarily for use by Yamaha dealers
and their qualified mechanics. It is not possible
to put an entire mechanic’s education into one
manual, so it is assumed that persons using
this book to perform maintenance and repairs
on Yamaha snowmobiles have a basic under-
standing of the mechanical concepts and pro-
cedures inherent in snowmobile repair.
Without such knowledge, attempted repairs or
service to this model may render it unfit and/or
unsafe to use.
Yamaha Motor Company, Ltd. is continually
striving to improve all models manufactured by
Yamaha.
Modifications and significant changes in speci-
fications or procedures will be forwarded to all
authorized Yamaha dealers and will, where
applicable, appear in future editions of this
manual.

HOW TO USE THIS MANUAL

Particularly important information is distin-
guished in this manual by the following notations:

The Safety Alert Symbol means ATTENTION!
BE ALERT! YOUR SAFETY IS INVOLVED!

Failure to follow WARNING instructions could
result in severe injury or death to the snowmo-
bile operator, a bystander, or a person inspect-
ing or repairing the snowmobile.

A CAUTION indicates special precautions that
must be taken to avoid damage to the snowmobile.

A NOTE provides key information that can
make procedures easier or clearer.

MANUAL FORMAT

All of the procedures in this manual are orga-
nized in a sequential, step-by-step format. The
information has been compiled to provide the
mechanic with an easy to read, handy refer-
ence that contains comprehensive explana-
tions of all inspection, repair, assembly, and
disassembly operations.
In this revised format, the condition of a faulty
component will precede an arrow symbol and
the course of action required to correct the
problem will follow the symbol, e.g.,
• Bearings

Pitting/damage

→

Replace.

EXPLODED DIAGRAM

Each chapter provides exploded diagrams
before each disassembly section to facilitate
correct disassembly and assembly procedures.

RS90K/RS90RK/RSG90K/RS90MK/RST90K/
RST90TFK
SERVICE MANUAL:
8FJ-28197-10 (981096) (LIT-12618-02-38)
RS90NL/RS90NRL/RS90RSL/RS90GTL/RS90MSL
SUPPLEMENTARY SERVICE MANUAL:
8GE-28197-10 (LIT-12618-02-47)
RSG90GTW/RST90GTW
SUPPLEMENTARY SERVICE MANUAL:
8GX-28197-10 (LIT-12618-02-51)

RS90RX/RS90GTX

RS90GTAX/RS90LTX

RS90LTGTX

SUPPLEMENTARY SERVICE MANUAL

©

2007 by Yamaha Motor

Corporation, U.S.A.

1st Edition, May 2007

All rights reserved. Any reprinting or
unauthorized use without the written

permission of Yamaha Motor Corporation,

U.S.A. is expressly prohibited.

Printed in U.S.A.

P/N.LIT-12618-02-70

WARNING

CAUTION:

NOTE:

«
1
2
3
4
...
»

Содержание Vector RS90GTAX 2008



















































































Отзывы:

Нет отзывов

Похожие инструкции для Vector RS90GTAX 2008

Бренд: Yeti Страницы: 83

Бренд: Yamaha Страницы: 114

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды